
EU / Blanc / 1KG
- EU / Gris / 1KG
- EU / Noir / 1KG
- EU / Blanc / 1KG
- EU / Bleu / 1KG
- EU / Vert / 1KG
- EU / Clair / 1KG
- EU / Orange / 1KG
- EU / Violet / 1KG
- EU / Rouge / 1KG
- CA / Gris / 1KG
- CA / Noir / 1KG
- CA / Blanc / 1KG
- CA / Bleu / 1KG
- CA / Vert / 1KG
- CA / Clair / 1KG
- CA / Orange / 1KG
- CA / Violet / 1KG
- CA / Rouge / 1KG
*The RFID function requires an internet connection and must be used with Anycubic filaments that support RFID function.
Recommended Settings
Dry Out Before Use | Recommended |
Retraction Length | 70℃-80℃, 8h-12h |
ACE Pro Compatibility | Compatible |
Printing Temperature | 240-280℃ |
Heated Bed Temperature | 80-100℃ |
Printing Speed | 50-150mm/s |
Cooling Time | 6s |
Maximum Volumetric Flow Rate | 15mm/s |
Material Performance
Physical Properties | ||
Density | 1.05(g/cm3) | |
Melt Flow Index | 30-35g/10min(210℃/2.16kg) | |
Melting Point Temperature | 180℃ | |
Vicat Softening Temperature | 95℃ | |
Heat Deflection Temperature | 85℃ | |
Water Absorption Saturation Rate | 6s | |
Maximum Volumetric Flow Rate | 15mm/s |
Mechanical Properties | ||
Tensile Modulus | 2200MPa | |
Tensile Strength | 34MPa | |
Elongation at Break | 11% | |
Bending Modulus | 2200MPa | |
Bending Strength | 63MPa | |
Impact Strength | XY40kJ/m² | |
Interlayer Tensile Strength Z | 22MPa |
Model Print
FAQs
What should I do if the filament I received has problems with quantity, color, or other problems?
What should I do if the filament I received has problems with quantity, color, or other problems?
If there are any problems with the filament you received, please contact our support team for answers.
Where can I learn about the settings for different filaments?
Where can I learn about the settings for different filaments?
Click here to learn about filament settings here.
What is the RFID intelligent recognition system in Anycubic ABS filament, and how does it improve printing efficiency?
What is the RFID intelligent recognition system in Anycubic ABS filament, and how does it improve printing efficiency?
Anycubic ABS filament is equipped with an RFID intelligent recognition system that automatically identifies the filament and prints optimal settings when used with the ACE Pro printer. This streamlined process helps achieve an efficient, hassle-free printing experience. Note that the RFID function requires an internet connection and is compatible only with Anycubic filaments supporting this feature.
How does Anycubic ABS filament minimize warping during full-bed printing?
How does Anycubic ABS filament minimize warping during full-bed printing?
The filament is engineered with optimized anti-warping properties. It supports a 220mm×220mm anti-warping print area with a heated bed maintained at 100℃, significantly reducing thermal stress during printing. This design helps ensure stable prints, even when using larger build volumes compared to other materials that are more prone to warping.
What are the recommended printing settings for using Anycubic ABS filament?
What are the recommended printing settings for using Anycubic ABS filament?
For optimal results, it’s recommended to pre-dry the filament at 70℃–80℃ for 8–12 hours. During printing, use a temperature range of 240℃–280℃ with a heated bed set between 80℃–100℃. A printing speed of 50–150 mm/s, a cooling time of about 6 seconds, and a maximum volumetric flow rate of 15 mm³/s are advised to achieve high-quality prints while maintaining material integrity.