The numbered annotations on the product page correspond to the following explanations:

1. TPU filaments are only suitable for single-color printing and cannot be used with ACE Pro for multicolor printing.
2. Pair two ACE PRO units and an 8-color feeding unit to achieve 8-color printing.
3. For a smoother multicolor printing experience, please prioritize the use of plastic filament spools.
4. The data provided is measured at 1 meter away from the front of the printer. Due to individual machine differences, the actual noise level may deviate from the advertised value,which is considered normal.
5. Need to be used with a camera. (The printer includes a camera, no separate purchase required. )
6. Expected to launch in Q1 of 2025.
7. To select models from Makeronline and utilize the Anycubic Slicer slicing software, you must access a PC that already has the software installed.

The numbered annotations on the product page correspond to the following explanations:

1. TPU filaments are only suitable for single-color printing and cannot be used with ACE Pro for multicolor printing.
2. Pair two ACE PRO units and an 8-color feeding unit to achieve 8-color printing.
3. For a smoother multicolor printing experience, please prioritize the use of plastic filament spools.
4. The data provided is measured at 1 meter away from the front of the printer. Due to individual machine differences, the actual noise level may deviate from the advertised value,which is considered normal.
5. Need to be used with a camera. (The printer includes a camera, no separate purchase required. )
6. Expected to launch in Q1 of 2025.
7. To select models from Makeronline and utilize the Anycubic Slicer slicing software, you must access a PC that already has the software installed.

The numbered annotations on the product page correspond to the following explanations:

1. TPU filaments are only suitable for single-color printing and cannot be used with ACE Pro for multicolor printing.
2. Pair two ACE PRO units and an 8-color feeding unit to achieve 8-color printing.
3. For a smoother multicolor printing experience, please prioritize the use of plastic filament spools.
4. The data provided is measured at 1 meter away from the front of the printer. Due to individual machine differences, the actual noise level may deviate from the advertised value,which is considered normal.
5. Need to be used with a camera. (The printer includes a camera, no separate purchase required. )
6. Expected to launch in Q1 of 2025.
7. To select models from Makeronline and utilize the Anycubic Slicer slicing software, you must access a PC that already has the software installed.

The numbered annotations on the product page correspond to the following explanations:

1. TPU filaments are only suitable for single-color printing and cannot be used with ACE Pro for multicolor printing.
2. Pair two ACE PRO units and an 8-color feeding unit to achieve 8-color printing.
3. For a smoother multicolor printing experience, please prioritize the use of plastic filament spools.
4. The data provided is measured at 1 meter away from the front of the printer. Due to individual machine differences, the actual noise level may deviate from the advertised value,which is considered normal.
5. Need to be used with a camera. (The printer includes a camera, no separate purchase required. )
6. Expected to launch in Q1 of 2025.
7. To select models from Makeronline and utilize the Anycubic Slicer slicing software, you must access a PC that already has the software installed.

The numbered annotations on the product page correspond to the following explanations:

1. TPU filaments are only suitable for single-color printing and cannot be used with ACE Pro for multicolor printing.
2. Pair two ACE PRO units and an 8-color feeding unit to achieve 8-color printing.
3. For a smoother multicolor printing experience, please prioritize the use of plastic filament spools.
4. The data provided is measured at 1 meter away from the front of the printer. Due to individual machine differences, the actual noise level may deviate from the advertised value,which is considered normal.
5. Need to be used with a camera. (The printer includes a camera, no separate purchase required. )
6. Expected to launch in Q1 of 2025.
7. To select models from Makeronline and utilize the Anycubic Slicer slicing software, you must access a PC that already has the software installed.